Register
FaceBook Twitter

Reboot system after panda cloud scan

Post your query about Panda Cloud Cleaner here. Our experts will assist you!
Official moderator
Posts: 965
Joined: Tue, 24 Oct 2017, 12:04

Re: Reboot system after panda cloud scan

Postby Darth Panda » Thu, 23 Aug 2018, 16:38

Start your pc and use the F11 to boot into recovery mode.

Next select Advanced and then Command prompt. From here run chkdsk c: /r /x
then run:
sfc /scannow
Technical support – Panda Security
www.pandasecurity.com

Registered user
Posts: 6
Joined: Wed, 22 Aug 2018, 03:01

Re: Reboot system after panda cloud scan

Postby pandadome » Thu, 23 Aug 2018, 16:56

Please understand that all cmd key doesn't work. May be i can boot à soft at start system, i will tried to exe à recovery onekey for lenovo if it dont work i will tried to exe à bootable usb for win 7., i think the solution is a bootable soft but which one...?

Official moderator
Posts: 965
Joined: Tue, 24 Oct 2017, 12:04

Re: Reboot system after panda cloud scan

Postby Darth Panda » Mon, 27 Aug 2018, 13:07

Hi again.

There are two options to try and see if the computer works again:

1. Use a windows 7 bootable version (usb or cdrom) and once the installer has began, check if the installer finds the previous windows installation, and if so, you will be able to repair that windows installation which is not working properly and after this re-installation, check if the computer works properly. (Keep in mind that the bootable version has to be the same which is already installed in the computer, because if not, it won't recognize the previous windows installation.)

2. Press F11 again when booting the computer, and try to select lenovo recovery option. The problem when selecting this option may be that you'll have the pc in the same status as when you bought it.

Best regards.
Technical support – Panda Security
www.pandasecurity.com

Previous

Return to Panda Cloud Cleaner - Issues

Who is online

Users browsing this forum: No registered users and 1 guest