Page 2 of 2
Re: Reboot system after panda cloud scan
Posted: Thu, 23 Aug 2018, 16:38
by Darth Panda
Start your pc and use the F11 to boot into recovery mode.
Next select Advanced and then Command prompt. From here run chkdsk c: /r /x
then run:
sfc /scannow
Re: Reboot system after panda cloud scan
Posted: Thu, 23 Aug 2018, 16:56
by pandadome
Please understand that all cmd key doesn't work. May be i can boot à soft at start system, i will tried to exe à recovery onekey for lenovo if it dont work i will tried to exe à bootable usb for win 7., i think the solution is a bootable soft but which one...?
Re: Reboot system after panda cloud scan
Posted: Mon, 27 Aug 2018, 13:07
by Darth Panda
Hi again.
There are two options to try and see if the computer works again:
1. Use a windows 7 bootable version (usb or cdrom) and once the installer has began, check if the installer finds the previous windows installation, and if so, you will be able to repair that windows installation which is not working properly and after this re-installation, check if the computer works properly. (Keep in mind that the bootable version has to be the same which is already installed in the computer, because if not, it won't recognize the previous windows installation.)
2. Press F11 again when booting the computer, and try to select lenovo recovery option. The problem when selecting this option may be that you'll have the pc in the same status as when you bought it.
Best regards.