I have been using Panda for a number of years.
I have just noticed that the antivirus has been disabled.
I an unable to switch it back on.
[CLOSED] Panda disabled and cannot reenable
- VirusBuster
- Official moderator
- Posts: 7595
- Joined: Mon, 02 Apr 2012, 18:53
- Location: Panda HQ - Bilbao
Re: Panda disabled and cannot reenable
Can you provide more details?
What Panda product version are you using? You can check it in the version.ini file located in the antivirus installation folder
Go to start -- run, type services.msc and press OK
Panda services must be "Running" and "Automatic start". If any of them is not started, right it and select to start it. If that process shows any error, send us a screenshot of it
What Panda product version are you using? You can check it in the version.ini file located in the antivirus installation folder
Go to start -- run, type services.msc and press OK
Panda services must be "Running" and "Automatic start". If any of them is not started, right it and select to start it. If that process shows any error, send us a screenshot of it
Regards,
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Re: Panda disabled and cannot reenable
BONJOUR
J'ai le même problème
Lorsque j'ouvre mon PC, Panda (free dernière version installé il y a 1mois) est toujours désactivé et je ne trouve rien pour le réactiver.
Si je lance un scan rapide, apparemment il s'active.. Ce n'est pas très sécurisant.
Comment faire pour paramétrer cet anti virus activé par défaut?
Merci beaucoup pour l'aide.
J'ai le même problème
Lorsque j'ouvre mon PC, Panda (free dernière version installé il y a 1mois) est toujours désactivé et je ne trouve rien pour le réactiver.
Si je lance un scan rapide, apparemment il s'active.. Ce n'est pas très sécurisant.
Comment faire pour paramétrer cet anti virus activé par défaut?
Merci beaucoup pour l'aide.
- VirusBuster
- Official moderator
- Posts: 7595
- Joined: Mon, 02 Apr 2012, 18:53
- Location: Panda HQ - Bilbao
Re: Panda disabled and cannot reenable
Sorry, but support in this forum is provided only in English (read the forum rules), please translate your post or we will have to delete itDomi33 wrote:BONJOUR
J'ai le même problème
Lorsque j'ouvre mon PC, Panda (free dernière version installé il y a 1mois) est toujours désactivé et je ne trouve rien pour le réactiver.
Si je lance un scan rapide, apparemment il s'active.. Ce n'est pas très sécurisant.
Comment faire pour paramétrer cet anti virus activé par défaut?
Merci beaucoup pour l'aide.
Regards,
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Re: Panda disabled and cannot reenable
Sorry
I have the same problem
When I open my PC, Panda (free last version installed there is 1 month) is always deactivated and I do not find anything to reactivate it.
If I launch a fast scan, apparently he works... It is not very reassuring for secure.
How make for parameter this anti virus activated by default?
Thank you very much for the help.
I have the same problem
When I open my PC, Panda (free last version installed there is 1 month) is always deactivated and I do not find anything to reactivate it.
If I launch a fast scan, apparently he works... It is not very reassuring for secure.
How make for parameter this anti virus activated by default?
Thank you very much for the help.
- VirusBuster
- Official moderator
- Posts: 7595
- Joined: Mon, 02 Apr 2012, 18:53
- Location: Panda HQ - Bilbao
Re: Panda disabled and cannot reenable
Have you checked the services status as instructed to Rusty63?
Regards,
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Re: Panda disabled and cannot reenable
Yes of course! I see 3 line Panda
all are "automatic" but running not working.
I do not know how to make sceen shot sorry
all are "automatic" but running not working.
I do not know how to make sceen shot sorry
- VirusBuster
- Official moderator
- Posts: 7595
- Joined: Mon, 02 Apr 2012, 18:53
- Location: Panda HQ - Bilbao
Re: Panda disabled and cannot reenable
Do you receive any error when trying to start them?
The other option is to capture a specific window. You can do this by pressing the Alt and Print Screen keys at the same time. You will, once again, have to open Paint, paste the image, and Save it.
On a majority of keyboards, the Print Screen key can be found in the upper-right corner. It will likely be labeled as either PrtScn or PrtSc.
There are two ways to take a screenshot. A tap of the Print Screen button will copy an image of your entire screen. This image must then be pasted (this can be done by pressing the Control and V keys at the same time) in a program like Paint, at which point you will also be able to save the image.Domi33 wrote:I do not know how to make sceen shot sorry
The other option is to capture a specific window. You can do this by pressing the Alt and Print Screen keys at the same time. You will, once again, have to open Paint, paste the image, and Save it.
On a majority of keyboards, the Print Screen key can be found in the upper-right corner. It will likely be labeled as either PrtScn or PrtSc.
Regards,
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
- VirusBuster
- Official moderator
- Posts: 7595
- Joined: Mon, 02 Apr 2012, 18:53
- Location: Panda HQ - Bilbao
Re: Panda disabled and cannot reenable
Topic closed due to lack of response
TOPIC CLOSED
TOPIC CLOSED
Regards,
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them
Jorge Torre
TechSupport Department - Panda Security
I don't reply to private messages unless I have previously requested them